输变电工程电磁辐射污染的初步探讨

为了解输变电工程对周边环境的影响,对南阳地区某110 kV输变电工程进行实地监测。结果表明,工频电场、工频磁场和无线电干扰远远低于国家相关标准限值,而且随着距离的递增呈衰减趋势。然而监测往往选在"好天气"的时间进行,不能反映"坏天气"的实际状况。结合输变电工程环境影响评价的实际工作经验,分析电磁污染和公众参与现状,发现问题并提出建议。     

Detection Method for Avian Influenza Viruses in Water

Recent events have shown that humans may become infected with some pathogenic avian influenza A viruses (AIV). Since soil and water, including lakes, rivers, and seashores, may be contaminated by AIV excreted by birds, effective methods are needed for monitoring water for emerging viruses. Combining water filtration with molecular methods such as PCR is a fast and effective way for detecting viruses. The objective of this study was to apply a convenient method for the detection of AIV in natural water samples. Distilled water and lake, river, and seawater were artificially contaminated with AIV (H5N3) and passed through a filter system. AIV was detected from filter membrane by real-time RT-PCR. The performance of Zetapor, SMWP, and Sartobind D5F membranes in recovering influenza viruses was first evaluated using contaminated distilled water. SWMP, which gave the highest virus recoveries, was then compared with a pre-filter combined GF/F filter membrane in a trial using natural water samples. In this study, the cellulose membrane SMWP was found to be practical for recovery of AIVs in water. Viral yields varied between 62.1 and 65.9% in distilled water and between 1 and 16.7% in natural water samples. The borosilicate glass membrane GF/F combined with pre-filter was also feasible in filtering natural water samples with viral yields from 1.98 to 7.33%. The methods described can be used for monitoring fresh and seawater samples for the presence of AIV and to determine the source of AIV transmission in an outbreak situation.     

滁州市震害预测项目中地图数据处理方法研究

本文以滁州市震害预测项目为例,介绍了将DWG格式数据转换成SHAPE格式数据的方法和整个数据处理流程。总结了在数据处理过程中摸索出的数据错误检查和修改方法。     

Management strategies to mitigate the impacts of climate change on sea turtle’s terrestrial reproductive phase

Climate change poses a serious threat to sea turtles (Cheloniidae) as their terrestrial reproductive phase is only successful within a limited range of environmental and physical conditions. These conditions are likely to become less optimal as climate change progresses. To date, management and conservation of sea turtles has focused almost entirely on non-climatic stressors, due at least in part to practitioners not knowing what strategies to take and the feasibility and risks of potential strategies. To aid the management of sea turtles in a changing environment, we identified management strategies via a focus workshop and surveys to mitigate the impacts of climate change to the terrestrial reproductive phase of sea turtles. The effectiveness, ecological risks and potential social and logistical constraints associated with implementing each of the identified management strategies is discussed. Twenty management strategies were identified; strategies varied from habitat protection to more active and direct manipulation of nests and the nesting environment. Based on our results, we suggest a three-pronged approach to sea turtle conservation in light of climate change, where managers and researchers should: 1) enhance sea turtle resilience to climate change by mitigating other threats; 2) prioritise implementing the ‘no regret’ and ‘reversible’ management strategies identified here; and 3) fill the knowledge gaps identified to aid the trial and implementation of the potential strategies identified here. By combining these three approaches our collective toolkit of sea turtle management strategies will expand, giving us an array of viable approaches to implement as climate change impacts become more extreme.     

Design and manufacturing of femoral stems for the Indian population

Several researchers have stressed the need for a proper implant-patient match in hip joint replacements, in particular, for cementless femoral stems. Some of the complications of mismatch are aseptic loosening, improper load distribution, and discomfort. In this study, the differences in dimensions between femurs of elderly Indians and those of populations from other regions are compared in order to solve the problem of a possible geometric mismatch between a selected implant and the femurs of an Indian patients are concerned. This paper also describes a methodology for implant designing from measured anthropometric data, fit evaluation, finite element (FE) stress analysis and subsequently implant manufacturing using the CAM (Computer Aided Manufacturing) technique. The machining of the Titanium alloy femoral stem is usually performed on a 5 Axis CNC (Computer Numerical Control) machining center. However, in this study the machining of the femoral stem was effectively performed on a 3 Axis CNC machining center to emphasize on economical benefits for low cost manufacturing strategy.     

Incorporating stakeholder decision support needs into an integrated regional Earth system model

A new modeling effort exploring the opportunities, constraints, and interactions between mitigation and adaptation at regional scale is utilizing stakeholder engagement in an innovative approach to guide model development and demonstration, including uncertainty characterization, to effectively inform regional decision making. This project, the integrated Regional Earth System Model (iRESM), employs structured stakeholder interactions and literature reviews to identify the most relevant adaptation and mitigation alternatives and decision criteria for each regional application of the framework. The information is used to identify important model capabilities and to provide a focus for numerical experiments. This paper presents the stakeholder research results from the first iRESM pilot region. The pilot region includes the Great Lakes Basin in the Midwest portion of the United States as well as other contiguous states. This geographic area (14 states in total) permits cohesive modeling of hydrologic systems while also providing strong gradients in climate, demography, land cover/land use, and energy supply and demand. The results from the stakeholder research indicate that, for this region, iRESM should prioritize addressing adaptation alternatives in the water resources, urban infrastructure, and agriculture sectors, including water conservation, expanded water quality monitoring, altered reservoir releases, lowered water intakes, urban infrastructure upgrades, increased electric power reserves in urban areas, and land use management/crop selection changes. For mitigation in this region, the stakeholder research implies that iRESM should focus on policies affecting the penetration of renewable energy technologies, and the costs and effectiveness of energy efficiency, bioenergy production, wind energy, and carbon capture and sequestration.     

Establishment of facultative sexuals

The existence of sex is one of the major unsolved problems in biology. We use computer simulations to model conditions in which sex may first become established. We develop an individual-based population model and show that a hypothetical facultative sex gene can fix, provided that the initial cost is low. It is demonstrated that the equilibrium fitness in the population increases with increasing population size and decreasing mutation rate. The probability of the establishment of the sex gene is found not to be directly related to the fitness difference between the asexual and sexual populations. This change in fitness on changing the parameters of the model is investigated.     

Experience,but not distance,influences the recruitment precision in the stingless bee <Emphasis Type="Italic">Scaptotrigona mexicana</Emphasis>

Recruitment precision, i.e. the proportion of recruits that reach an advertised food source, is a crucial adaptation of social bees to their environment. Studies with honeybees showed that recruitment precision is not a fixed feature, but it may be enhanced by factors like experience and distance. However, little is known regarding the recruitment precision of stingless bees. Hence, in this study, we examined the effects of experience and spatial distance on the precision of the food communication system of the stingless bee Scaptotrigona mexicana. We conducted the experiments by training bees to a three-dimensional artificial patch at several distances from the colony. We recorded the choices of individual recruited foragers, either being newcomers (foragers without experience with the advertised food source) or experienced (foragers that had previously visited the feeder). We found that the average precision of newcomers (95.6 ± 2.61%) was significantly higher than that of experienced bees (80.2 ± 1.12%). While this might seem counter-intuitive on first sight, this “loss” of precision can be explained by the tendency of experienced recruits to explore nearby areas to find new rewarding food sources after they had initially learned the exact location of the food source. Increasing the distance from the colony had no significant effect on the precision of the foraging bees. Thus, our data show that experience, but not the distance of the food source, affected the patch precision of S. mexicana foragers.     

Organizational policy and other factors associated with emergency medical technician seat belt use

INTRODUCTION: The purpose of this study was to determine factors associated with seat belt usage among Emergency Medical Technicians (EMTs). METHODS: As part of biennial re-registration paperwork, nationally registered EMTs completed a survey on the safety and health risks facing Emergency Medical Services (EMS) providers. Respondents were asked to describe their seat belt use while in the front seats of an ambulance. They were categorized as "high" in seat belt use if it had been more than a year since they had not worn their seat belt or "low" in seat belt use if they had not worn their seat belt at least once within the past 12 months. A logistic regression model was fit to estimate the association between seat belt use, organizational seat belt policy, type of EMS organization worked for, EMT certification level, and the size of community where EMS work is performed. RESULTS: Of the 41,823 EMTs that re-registered in 2003, surveys were received from 29,575 (70.7%). A significant interaction between organizational seat belt policy and type of EMS organization was found to exist. Participants reporting no organizational seat belt policy had lower odds of seat belt usage when compared to individuals that do have a seat belt policy. Odds Ratios ranged from 0.20 (95% CI 0.10-0.40) for military organizations to 0.59 (95% CI 0.38-0.93) for private EMS organizations. Paramedics and those working in rural areas also had lower odds of seat belt use. CONCLUSION: Several factors were found to be associated with seat belt usage among EMTs while in the front compartment of an ambulance. However, it appears that only one, organizational policy, is a modifiable characteristic.     

Driver education and graduated licensing in North America: past, present, and future

PROBLEM: A stated objective of driver education in North America is to produce safer drivers, typically defined as drivers less likely to crash. This paper examines the extent to which driver education has achieved this objective independently as well as the extent to which such programs can support the success of graduated licensing in reducing young driver crashes. In so doing, it discusses past experiences, recent developments, and the future direction of driver education and training in relation to graduated driver licensing. METHOD: Literature review and synthesis. RESULTS: Driver education programs have yet to demonstrate consistent attainment of their safety objectives. Moreover, they have not been found to enhance the safety effectiveness of graduated licensing programs--indeed, some practices, for example, "time discounts" for driver education have actually had a detrimental effect on teen safety. DISCUSSION: Despite its disappointing safety record to date, it is important not to abandon driver education. In particular, there are opportunities to improve driver education so that it achieves its safety objectives, and ensure that programs in the future complement graduated driver licensing and contribute to its overall safety benefits. Current and future efforts to improve driver education and better integrate it with graduated licensing programs, however, need to be rigorously evaluated to determine what does and does not work to reduce young driver crashes, and as importantly, to understand why this is the case. IMPACT ON INDUSTRY: Improved driver education integrated with graduated driver licensing has potential safety benefits.